Filter
Top Products
COPPER WATER TUBE AND JOINT MATERIAL PRESSURE RATINGS
JOINT MATERIALS
A 50-50 Lead-Tin at 200 F
Note 1
D 95-5 Tin-Antimony at 200 F
Note 2
B 50-50 Lead-Tin at 150 F E 95-5 Tin-Antimony at 150 F
C 50-50 Lead-Tin at 100 F F 95-5 Tin-Antimony at 100 F
1. Not recommended for high system water pressures.
2. Standard factory joint material.
THE ABOVE CHART IS FOR REFERENCE ONLY: Check all system component pressure ratings (coils, valves, pumps, etc.)
and any applicable local or national piping codes prior to specifying system pressure rating.
30