Filter
Top Products
12
40RM – Commercial Packaged
Air Handler
40RM–016––B501GC
Cooling Coil
–– Direct Expansion
Q–Direct Expansion for Heat Pump Duty
S–Chilled Water
Not Used
Expansion Device
–– None (40RMS)
B–Thermostatic Expansion Valves (40RM, 40RMQ)
H–TXV with High Capacity, 4 Row Coil
Factory-Installed Options
GC – Unpainted, Standard Motor,
and Standard Drive
HC – Unpainted, Standard Motor,
and Medium-Static Drive
(Not available for 60 Hz 028 size
or 50 Hz 016-028 sizes)
TC – Unpainted, Alternate Motor,
and Medium-Static Drive
(60 Hz 028 size and
50 Hz 016-028 sizes)
YC – Unpainted, Alternate Motor, and
High-Static Drive*
ED – Painted, Standard Motor, and
Standard Drive
FD – Painted, Standard Motor, and
Medium-Static Drive
(Not available for 60 Hz 028 size
or 50 Hz 016-028 sizes)
RD – Painted, Alternate Motor, and
Medium-Static Drive
(60 Hz 028 size and
50 Hz 016-028 sizes)
WD – Painted, Alternate Motor,
and High-Static Drive*
Packaging
1–Standard Domestic
3–Standard Export
Revision Number
0– Original
Nominal Capacity – Tons (kW)
007 – 6 (21) 016 – 15 (52)
008 – 7-1/2 (26) 024 – 20 (70)
010 – 8-1/2 (29) 028 – 25 (87)
012 – 10 (35) 034 – 30 (105)
014 – 12-1/2 (43)
Voltage Designation (V-Ph-Hz)
1– 575-3-60 8–230-3-50
3–208/230-1-60 9–400-3-50
(007-010 sizes only)
5–208/230-3-60
6–208/230/460-3-60 (all sizes 007-014;
size 016 except YC and WD options)
460-3-60 (sizes 016 with YC or WD options
and all size 024-034 units)
LEGEND
TXV — Thermostat Expansion Valve
*YC and WD option codes for all 034 size units and 008, 010 size units with 208/230-1-60
power designate standard motor and high-static drive.
NOTE: See the following table for the sizes available for each unit.
UNIT 007 008 010 012 014 016 024 028 034
40RM XX XXXXXX
40RMQ X X XXX
40RMS XXXXXXXX
Fig. 2 — Model Number Nomenclature
Fig. 3 — Foam Block Location
LEGEND
TXV — Thermostatic Expansion Valve