Filter
Top Products
59
d. Remove the ignition electrode and inspect it for oxides. Clean the oxides off the electrode with sandpaper. Inspect
the ceramic insulator for cracks and replace the ignitor assembly if necessary.
e. Remove the fan/gas valve assembly from the burner hood. Inspect for lint and dust. If signifi cant lint and dust are
found, disassemble the fan/gas valve assembly to expose the swirlplate and fan inlet (see the exploded diagram in
the parts list at the back of this manual). Vacuum these parts as required, being careful not to damage the vanes on
the swirlplate.
f. Remove the burner hood to access the burner and the combustion chamber.
g001 Tc0 Tw(59)Tj/eo6mbu6nyant lid. Inspeve assembly froth sandpapf Tc0 Tw(59showsand dan t deteriorad thed. (. Inspect )]TJ1.35corros th,r cracks andimmehe tel if4.9ndpaper)55.2Tc0 Tw(59bleketr for cracks,tor assembly if4.9ndcessary)65(.)]TJ-1.355h
59