New Buck Corporation 34 Indoor Fireplace User Manual


 
STEP 7: Slide the unit into the front opening of the surround so the top metal trim panel and
outer sides of the heater meet flush with the surround front.
STEP 8: Remove cloth or blanket from underneath stove.
STEP 9: Take the two metal “ell” brackets with the screws provided and anchor the back of
the fireplace to the surround.
STEP 10: Place top on to the surround (mantel), flush with the back and equal on each end.
Secure both ends and middle with screws.
EXPLODED VIEW OF MODEL 34 SURROUND KIT# PAKDFP34
SURROUND BASE
AS VIEWED FROM BACK OF SURROUND (MANTEL)
29