Filter
Top Products
7
18
If your System Type is:
1
Gas Furnace - Single Stage, go to step 20
1
Gas Furnace - Multistage, perform step 19A
1
Electric Furnace, perform step 19B
1
Heat Pump, perform step 19C
If your Gas or Electric furnace system also has:
1
Electric Air Conditioning - Multistage, perform additional step 19D
17
Set Time and Date
Press the a. MENU button twice.
Scroll up or down to b. User Settings (it is the fi rst
option), then press the Select button.
MENU button
MENU MODE FAN RUN
75
76 H
74 C
11:15 AM Outside 60
Scroll up or down to c. Set Clock (it is the fi rst option),
then press the Select button.
Pressd.
3
or
4
to highlight the data you want to change.
Scroll up or down (e. + or -) to make changes.
Press the f. Set button when you are fi nished.
Press the g. Done button twice to exit the menu.
Done
Select
Menu Selection
User Settings
Usage Graph
ESM Setpoints
ZWave Install
Select button
Scroll
up
Scroll
down
Done
Select
User Settings
Set Clock
Filter Service
Maint Service
Screen Timeout
Select button
Scroll
up
Scroll
down
Set button
Scroll
up
Scroll
down
Back
Set Clock
Set
Time 10 :15 AM
Date 3 / 23 / 09
Day Mon
System Settings at Thermostat
Note: It may be necessary to go back and review step 6 in the installation section to verify the differences
between the system types.