Bryant 581B Gas Heater User Manual


 
178
BASE UNIT DIMENSIONS — 579F240,300
NOTES:
1. Refer to print for roof curb accessory dimensions.
2. Dimensions in ( ) are in millimeters.
3. Center of Gravity.
4. Direction of airflow.
5. Ductwork to be attached to accessory roof curb only.
6. Minimum clearance:
Rear: 7-0 (2134) for coil removal. This dimension can be reduced to
4-0 (1219) if conditions permit coil removal from the top.
•4-0 (1219) to combustible surfaces, all four sides (includes between
units).
Left side: 4-0 (1219) for proper condenser coil airflow.
Front: 4-0 (1219) for control box access.
• Right side: 4-0 (1219) for proper operation of damper and power
exhaust if so equipped.
Top: 6-0 (1829) to assure proper condenser fan operation.
Bottom: 14 (356) to combustible surfaces (when not using curb).
Control box side: 3-0 (914) to ungrounded surfaces, non-combustible.
• Control box side: 3-6 (1067) to block or concrete walls, or other
grounded surfaces.
Local codes or jurisdiction may prevail.
7. With the exception of clearance for the condenser coil and the damper/
power exhaust as stated in Note #6, a removable fence or barricade
requires no clearance.
8. Dimensions are from outside of corner post. Allow 0-
5
/
16
(8) on each
side for top cover drip edge.
9. See drawing 50TJ500353 for service option details.
UNIT
579F
STD UNIT
WEIGHT
ECONOMIZER
WEIGHT
CORNER
A
CORNER
B
CORNER
C
CORNER
D
DIM A DIM B DIM C
Lb Kg Lb Kg Lb Kg Lb Kg Lb Kg Lb Kg ft-in. mm ft-in. mm ft-in. mm
240 1850 839 90 41 443 201 406 184 476 216 525 238 3-2 965 3-5 1041 1-8 508
300 2000 907 90 41 471 214 428 194 526 239 574 260 3-2 965 3-5 1041 1-8 508
a48-7339
579F180-300