Filter
Top Products
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Sewing Cylindrical or Large Pieces 43
4
Turn the screw at the bottom of the legs to
adjust their height.
5
When you are finished using the wide table,
remove it.
While slightly lifting up the wide table, pull it
off to the left.
6
Install the flat bed attachment back in its
original position.
Memo
● With the legs folded up, the wide table can
be stored attached to the hard case.
● The knee lifter can be stored attached to the
bottom of the wide table.
●
Do not move the sewing machine while
the wide table is attached, otherwise
damage or injuries may occur.
CAUTION