Brother PC-420PRW Sewing Machine User Manual


 
GETTING READY ——————————————————————————————————————————————————
30
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
a
Press (settings key) in the operation panel.
X The settings screen appears.
b
Press , , and (arrow keys) until
is selected.
c
Press (OK key).
X The screen for selecting the twin needle
appears.
d
Press to select .
To return to , press .
X The twin needle can now be used.
e
Press (OK key).
X The initial stitch screen appears again, and
appears in the lower-left corner of the
screen.
Even after the sewing machine is turned off,
the twin needle setting is not cancelled.
f
Select a stitch.
For details on selecting a stitch, refer to
“Selecting stitching” (page 68).
For details on the stitches that can be sewn
with the twin needle, refer to “Stitch
Settings” (page 128).
g
Start sewing.
For details on starting to sew, refer to
“Starting to sew” (page 49).
X Two lines of stitching are sewn parallel to
each other.
When using the twin needle, be sure to
select the twin needle setting, otherwise
the needle may break or the machine
may be damaged.
CAUTION
When using the twin needle, be sure to
select an appropriate stitch, otherwise
the needle may break or the machine
may be damaged.
When changing the sewing direction,
press (needle position button) to
raise the needle from the fabric, and then
raise the presser foot lever and turn the
fabric.
CAUTION
CAUTION