Filter
Top Products
72
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d
Press the stitch selection.
(Previous page key) displays the previous
screen, and (Next page key) displays the
next screen.
When a decorative stitch is selected
a Decorative stitch selection
b Set width, length and tension
c Single stitch sewing
d Repeat sewing
e Horizontal mirror image
f Delete a selected pattern
g Check combined pattern
h Automatic thread cutting
i Automatic reverse/reinforcement stitch
• To select a different stitch, press to
remove the selected pattern.
e
If necessary, specify the setting for automatic
reverse/reinforcement stitching and adjust the
stitch length, etc.
• For details on sewing with each of the utility
stitches, refer to the following pages.
Note
z When a stitch is selected, the icon for the
presser foot that should be used appears on
the screen. Check that the correct presser
foot is attached before starting to sew. If the
wrong presser foot is installed, turn off the
sewing machine, attach the correct presser
foot, and then select the desired stitch again.
Memo
z For details on adjusting the stitch width and
length, refer to "Adjusting the stitch width"
(page 56) and "Adjusting the stitch length"
(page 57).
a
i h
g
c d
b
f
e