Filter
Top Products
102
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Satin stitching
A decorative stitch can be sewn by changing the
stitch width of a satin stitch. If the sewing machine is
set so that the stitch width can be adjusted using the
sewing speed controller, the stitch width can quickly
and easily be adjusted. In this case, the sewing speed
is adjusted with the foot controller.
a
Connect the foot controller.
• For details, refer to "Starting to sew" (page
51).
b
Attach zigzag foot "J".
• For details, refer to "Replacing the presser
foot" (page 42).
c
Turn on the sewing machine, and then press
(Settings key) in the operation panel.
X The settings LCD appears.
d
Press ON for stitch width control setting.
X The machine is now set so that the stitch
width can be controlled with the sewing
speed controller.
If the stitch width control setting is set to
"ON", for stitch width will change to
sewing speed controller icon .
e
Press (Back key).
X The initial screen appears again.
f
Select stitch
24
.
• For details, refer to "Selecting stitching" (page
49).
g
While sewing, slide the sewing speed
controller to adjust the stitch width.
Slide the controller to the left to make the width
narrower. Slide the controller to the right to
make the width wider.
•
Adjust the sewing speed with the foot controller.
h
When you are finished sewing, set the stitch
width control setting back to OFF.
Memo
z
Although the stitching result differs depending
on the type of fabric being sewn and the
thickness of the thread being used, for best
results, adjust the stitch length to between 0.3
and 0.5 mm (1/64 and 1/32 inch).
J
WiderNarrower