Filter
Top Products
Troubleshooting 173
5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
You changed the stitch pattern settings, and then tried to save them by
pressing the manual memory key.
There is a possibility that the data for the selected pattern is corrupted.
You try to retrieve a pattern downloaded as one for a different machine.
The memory is full and the stitch or pattern cannot be saved.
The machine is in embroidery mode and the combined character
pattern is too large for the embroidery frame. You can rotate the pattern
90 degrees and continue combining characters.
The machine is deleting a previously saved pattern while in embroidery
edit mode.
This message is displayed when the embroidery unit is trying to
initialize while the embroidery foot is lowered.
You tried to create a design with too many points with the My Custom
Stitch function.
The start/stop button was pressed before the editing was completed
with the My custom stitch function.
Error Message Probable Cause