Filter
Top Products
5
Setting Up
the MFC
Windows
®
98/98SE/Me/
2000 Professional
Windows
®
XP
Macintosh
®
OS 8.5-9.2
Macintosh
®
OS X 10.1
Warning
If ink gets in your eyes irrigate them with water
immediately, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows;
2
Open the control panel cover by pulling it
toward you (
1
), then lift the top cover
toward the back (
2
).
The print heads will move to the ink
replacement position.
3
Remove the protective blue tape from the
colored ink cartridge covers.
4
Push the four colored ink cartridge covers
one at a time so they pop up.
5
Remove the white shipping cover by pulling
it towards you.
6
Take out black ink cartridge.
7
Carefully remove the sealing tape from the
bottom of the ink cartridge.
To prevent spilling ink and staining your
hands and clothing, peel the sealing tape
gently and slowly
.
Do not touch the ink opening on the
cartridge or removed tape.
6 Installing the Ink Cartridges
CHECK CARTRIDGE
Control Panel Cover
Top Cover
PUSH
PUSH
PUSHPUSH
Colored Ink
Cartridge Covers
■
The bottom of the white shipping cover is
wet with ink that will cause stains, so wipe
it clean before you place it down.
■
Do not throw away the white shipping
cover. You will need it when you transport
the machine.
White Shipping Cover
Opening
To be continued