Filter
Top Products
21
Make sure that you have completed the instructions in steps 1 to 20 on
pages 17 to 20.
Make sure that USB cable is connected between the MFC and your PC and
both powered ON.
K
Click “Start” and select “Printers and
Faxes”.
L
Click on “Add a printer” and the Add Printer
Wizard will start.
M
When the above screen appears, click
Next
.
N
Un-check the “
Automatically detect and
install the Plug and Play printer
” selection
and then click
Next
.
O
Select “
USB00x (Virtual printer port for
USB)
” from the pull down window for the
Printer Port Selection and then click
Next
.
P
Click on
Have Disk
.
Q
Browse the CD-ROM for the “
WXP
” folder.
Highlight the
WXP
folder and click
Open
.
Highlight the “
Addprt
” folder and click
Open
.
Installation of Brother Native Drivers For
Windows
®
XP
To be continued
Setting Up
the MFC
Windows
®
XP
Installing the Driver & Software