Filter
Top Products
GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
20
LCD (Liquid Crystal Display) Operation
From the LCD, patterns can be selected and edited, and operations for using the machine can be
displayed (page 11).
Viewing the LCD
When the machine is turned on, the opening screen appears. The screen shown below appears after the
confirmation message was displayed by lightly touching the LCD. (The machine can be set so that the opening
screen is not displayed (page 21).)
■ Pattern type selection screen
a Embroidery patterns
b Additional embroidery patterns
c Alphabet patterns
d Frame patterns
e Embroidery card
f Patterns stored in the machine's memory
g Moves the embroidery unit carriage to its storage position
Memo
z Refer to “Error messages” (page 78) for messages displayed on the LCD.
z Depending on the model, a different screen may be displayed when the machine is turned on.
a
b
c
d
e
f
g
F-combo-BrotherE_sgml.book Page 20 Thursday, November 17, 2005 3:39 PM