Filter
Top Products
3. INSTALLATION
BAS-311F-0, 311F-L, 326F-0
7
3-6. Installing the cushions
Place the two cushions (1) into the holes in the work table,
and secure them in place with the nails (2).
* Install so that the head of the nail does not protrude
from the rubber surface.
3-7. Installing the switching plate
Install the switching plate (1) to the work table with the two
wood screws (2) in the position shown in the illustration.
* The switching plate and the switch bracket which is
attached to the machine head prevent the sewing
machine from starting when the machine head is tilted
back. Therefore, this means that the sewing machine
will not start if the switching plate is not installed.
0056Q
(2)
(1)
(2)
(1)
15
11
9
1 162S