Filter
Top Products
52
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
DISPLAY UNIT
The measurement units that are displayed can
be selected. [mm/inch]
■ LCD button
Example: Selecting alphanumeric characters
When a specific pattern is selected,
press this key and then, press
to switch the display. The
settings such as the specified
alphanumeric character string and
color are confirmed.
Press this key to change the thread settings.
Press this key to select or cancel
programmed thread cutting. When
programmed thread cutting is set, the
thread is cut automatically after
reinforcement.
Press or to change the thread
density (characters and frame
patterns only).
Press this key to adjust the pattern.
Press this key when you want to change
the color, character by character in
character embroidery. Since the machine
stops at the end of each character, the
upper thread is changed as you embroider.
Press this key again to cancel multi-color.
The needle progresses one color or
one stitch (if pressed continuously, 9
stitches to 30 stitches) at a time and
changes the position for starting the
embroidery. This is used when a
specific color is not embroidered or
when restarting the machine after
power has been turned off in the
middle of the operation.
chapter2 Page 52 Monday, August 18, 2008 8:01 PM