Filter
Top Products
Terreon® 54" Semi-circular Washfountain with Cylindrical Air Valve
Installation Instructions TDB3104, WF3204
Bradley Corporation • 215-1470 Rev. H; EN 06-915
132/8/07
Installation Instructions continued . . .
Step 4b: Air Metering Valve assembly for B and H units and units with Tie Pipe option
1. Install hemmed end (not sharp end) of support tube with gasket onto bowl (see Figure 9).
2. Place sprayhead with 1/2" tubing onto support tube. Run the tubing down through support tube.
3. Insert the 1-1/2" vent pipe (supplied by installer) down through the support tube and thread into
vented trap.
SUPPORT TUBE
GASKET
125-011
SUPPORT TUBE
(STD) S57-005
(TAS) (JUV) S57-006
SEMI-CIRCULAR
BOWL PRE-PACK
S45-1523
VENTED TRAP
111-024
TIE BAR
PRE-PACK
S45-056
STANDARD PEDESTAL ASSY.
S17-259
TAS PEDESTAL ASSY.
S17-345
TOP COVER
107-185 (B)
107-048 (H)
ACTUATOR
MODULE ASSY.
S65-134
SPRAYHEAD
S05-054B
1/8" AIR TUBES
MODULE COVER
DRAIN
S45-273
VALVE ASSY.
(See Figure 7a)
ACCESS PANEL
186-1456
TERREON® SEM-CIRCULAR
BOWL
Part No. varies with color
of bowl. — Contact your Bradley Rep.
for assistance.
1-1/2" VENT PIPE
B/H
(B shown)
COVER
SECTION VIEW OF
B/H UNIT ASSEMBLY
SPRAYHEAD
ACTUATOR
MODULE
ASSY.
TIE
BAR
SUPPLY
TUBE
Figure 9