Filter
Top Products
Express® Lavatory System SS-Series
Installation Instructions - For Service Only SS-3/AST/WH97TAS
9
Bradley Corporation • 215-1240 Rev. D; EN 03-813 5/11/04
Installation Instructions
continue . . .
Installation Instructions
continued . . .
Step 4: Connecting supply
1. FOR HOT AND COLD SUPPLY: Connect the flexible hoses installed to the Vernatherm™
Mixing Valve to the hot and cold water supply piping from the wall (see Figure 6a).
Note: The red marking on Vernatherm™ Mixing Valve indicates hot water supply inlet.
FOR SINGLE TEMPERED SUPPLY: Attach the stop/strainer/check valve to the 1/2" tem-
pered supply line. Connect the flexible hose to the stop/strainer/check valve and air valve (see
Figure 6b).
Figure 6a
FLEXIBLE
SUPPLY
HOSE
VERNATHERM™
THERMOSTATIC
MIXING VALVE
FLEXIBLE
SUPPLY
HOSE
CONNECT TO
1/2" NPT COLD
WATER SUPPLY
CONNECT TO
1/2" NPT HOT
WATER SUPPLY
Figure 6b
CONNECT E TO
TEMPERED
WATER SUPPLY
FLEXIBLE
SUPPLY
HOSE
CHECK VALVE
1/2 NIPPLE
(113-006DJ)