Filter
Top Products
Express® Lavatory System SS-Series
Installation Instructions - For Service Only SS-3/AST/WH97TAS
7
Bradley Corporation • 215-1240 Rev. D; EN 03-813 5/11/04
Installation Instructions
continue . . .
Installation Instructions
continued . . .
Step 2: Mount frame to wall
1. Remove the nine Torx-head screws securing the panel to the frame, and remove the panel
(see Figure 3).
2. Position the frame against the wall, ensuring that it is level.
IMPORTANT: Anchoring the frame to a wall that is
not
flat may cause the frame to
bend. If necessary, install shims to compensate for wall distortion.
3. Ensure that the back of the frame is flat against the wall. If wall is not flat, insert shims
behind the frame to ensure that it will not bend when anchored.
4. Once you have positioned the frame such that it is level and flat against the wall or shimmed,
use the 3/8" bolts and washers to mount the frame to the wall (see Figure 4).
Figure 3
(9) TORX-HEAD
SCREW
FRAME
PANEL
Figure 4
3/8" BOLTS
AND WASHERS
FRAME