Filter
Top Products
DSDA iSCSI Disk Array Series Monitoring and Maintenance | en 25
Bosch Security Systems Installation Guide V 1 | 2008.08
3. Rotate the handle to extract the disk.
4. Support the bottom of the drive to remove it.
5. Reverse these steps to replace the hard disk.
The drive LED should be lit green now.
7.2.3 Replacement of Modules
Documentation on the replacement of other modules is available on
www.boschsecurity.com under Product Catalog > CCTV > IP Video > Disk Arrays.
Refer to these documents:
– Replacing CF Card.pdf
– Replacing Controller Module.pdf
– Replacing DIMMS.pdf
– Replacing NVMEM Battery.pdf
– Replacing PCI Card.pdf
– Replacing Power Supply.pdf
– Replacing System Chassis.pdf