Filter
Top Products
DSDA iSCSI Disk Array Series Monitoring and Maintenance | en 23
Bosch Security Systems Installation Guide V 1 | 2008.08
7 Monitoring and Maintenance
7.1 Monitoring the System
7.1.1 Using the FilerView Monitor
The system should be monitored. An overall system status monitor is provided by the
FilerView administration interface.
1. Connect to the FilerView interface as described in Section 5 Configuration through the
Web Interface, page 8.
2. In the navigation panel, select Real Time Status > Health Monitor.
The overall Health Monitor opens in a new browser window.
Keep this window open and check the status regularly.
3. In the navigation panel, select Real Time Status > Filer At-A-Glance.
Data traffic, CPU load etc. are visualized here.
7.1.2 Logs and Reports
1. Connect to the FilerView interface as described in Section 5 Configuration through the
Web Interface, page 8.
2. In the navigation panel, select Filer > Report.
A general report on the system displays.
3. In the navigation panel, select Filer > Syslog Messages.
The log file for all system messages displays.
4. In the navigation panel, select Network > Report.
Information on the network displays.
5. In the navigation panel, select LUNs > iSCSI > Report.
The iSCSI status and further information displays.
i
NOTICE!
You can find more detailed documentation on
www.boschsecurity.com under Product Catalog > CCTV > IP Video > Disk Arrays.