Filter
Top Products
IVMD | Configuration instructions Area settings | en 35
BOSCH Security Systems 1.0 | 2006.04
The following commands are available:
Save and
Exit Editor
The settings are saved. You exit the Editor for
the sensitive area.
Undo The last action you carried out is undone.
Set All The whole of the captured area is defined as
the sensitive area.
Clear All The whole of the captured area is defined as
non-sensitive.
Tool Selects an editing tool:
Rubber Band:
You can use the mouse to draw any size of
square.
Small Square, Medium Square, Large Square
You can edit the sensitive area as with a draw-
ing tool.
i
NOTE!
While you are drawing, hold down the SHIFT key to create non-
sensitive areas.
Drawing by itself without the SHIFT key marks out sensitive
areas.