Filter
Top Products
20 en | Area settings IVMD | Configuration instructions
1.0 | 2006.04 BOSCH Security Systems
Global Settings Here you can specify a minimum and maxi-
mum size for all objects that will generate an
alarm event. Objects that are smaller or larger
than the specified sizes will be ignored and
this will save computing power as a result.
Make sure that the range between the mini-
mum and maximum size is not too small, or
relevant objects may be unintentionally elimi-
nated from alarm generation.
Preview: Shows the calibration plane
(see page 23). You will also see two nested
cubes that symbolize the selected sizes
according to the calibration. You can use the
mouse to change the size of the cubes and
hence the settings for the minimum and maxi-
mum size.