Filter
Top Products
• Connections: Pluggable terminal blocks for AUX,
Option Bus, SLC, NAC, Main Board
Relays
• Wire Gauge: 12 AWG to 18 AWG (0.75 mm
2
to
3.25 mm
2
)
Enclosure
• Material: Cold rolled steel, 19 gauge (1.2 mm)
• Color: Red
Dimensions
• Enclosure (W x H x
D):
14.5 in. x 4.3 in. x 22.7 in.
(36.8 cm x 10.9 cm x 57.7 cm)
• with trim ring (W x
D):
17.5 in. x 25.6 in.(44.5 cm x 65.0 cm)
• Semi-flush
mounted (H
recessed / H
flush):
3.25 in. / 1.05 in. (8.25 cm / 2.7 cm)
Weight (enclosure): 18.1 lb (8.32 kg)
Ordering Information
FPA-1000-V2 Analog Addressable Fire Panel
Order number FPA-1000-V2
FPA-1000-LC FPA-1000 Analog Addressable Fire Panel
less enclosure
Analog Addressable Fire Panel without enclosure
Order number FPA-1000-LC
FPA-1000-LT Analog Addressable Fire Panel less trans-
former
Analog Addressable Fire Panel without transformer for
Latin America only
Order number FPA-1000-LT
Accessories
BATB-40 Battery Box
The BATB-40 Battery Box holds two dry or wet cell
batteries. The box can be used with fire alarm systems
or intrusion systems. It measures 21 in. x 20.75 in. x
7.25 in. (53.3 cm x 52.7 cm x 18.4 cm).
Order number BATB-40
BATB-80 Battery Box with Shelf
The BATB-80 Battery Box holds up to four dry or wet
cell batteries. The box can be used with fire alarm
systems or with intrusion systems. It measures
12.25 in. x 20.75 in. x 7.25 in. (31.1 cm x 52.7 cm x
18.4 cm) on the bottom and 9.2 in. x 20.75 in. x
7.25 in. (23.2 cm x 52.7 cm x 7.25 cm) on the shelf.
Order number BATB-80
BATB-SHELF Optional Battery Shelf
An optional battery shelf for the BATB-40. It allows
two additional batteries to be placed in the battery
box.
Order number BATB-SHELF
D5070 Analog Device Programmer
Programs address settings on EEPROM‑programmable
analog devices
Order number D5070
D7030X LED Annunciator
Eight zone LEDs indicate alarm conditions.
Order number D7030X
D7030X‑S2 LED Annunciator
Two LEDs indicate supervisory conditions; six indicate
alarm conditions.
Order number D7030X-S2
D7030X‑S8 LED Annunciator
All eight zone LEDs indicate supervisory conditions.
Order number D7030X-S8
D7032 Eight‑zone LED Annunciator Expander
Use with D7030X Series LED Annunciators
Order number D7032
D7035 Octal Relay Module
Provide eight Form C relay outputs (w/o enclosure) for
the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control
Panels (FACP)
Order number D7035
D7035B Octal Relay Module with Enclosure
Provide eight Form C relay outputs (w/ enclosure) for
the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control
Panels (FACP)
Order number D7035B
D7048 Octal Driver Module
Module and hardware
Order number D7048
D7048B Octal Driver Module with Fire Enclosure
Module, mounting plate, metal enclosure, and
hardware
Order number D7048B
FAA‑325‑2.5 Sampling Tube (2.5 ft)
2.5 ft (762 mm) long sample tube for use with the
FAD‑325 and FAD‑325‑R Analog Duct Detectors
Order number FAA-325-2.5
FAA‑325‑5 Sampling Tube (5 ft)
5 ft (1.52 m) long sample tube for use with the
FAD‑325 and FAD‑325‑R Analog Duct Detectors
Order number FAA-325-5
FAA‑325‑10 Sampling Tube (10 ft)
10 ft (3.05 m) long sample tube for use with the
FAD‑325 and FAD‑325‑R Analog Duct Detectors
Order number FAA-325-10
FAA‑325‑B4 4‑inch Analog Sensor Base
Is combined with analog addressable detectors that
use the advanced digital communication protocol to
provide early fire warning for life safety and property
protection
Order number FAA-325-B4
5 | FPA‑1000 Analog Addressable Fire Panels