Filter
Top Products
RAID Subsystem DVA-16K | Installation Manual Subsystem Connection and Operation | en 37
Bosch Security System F.01U.027.799 | V2 | 2008.08
When setting up the configurations, please follow these steps:
1. Power on the RAID subsystem.
2. Use the LCD panel or the terminal emulation program to access the firmware.
3. Create at least one (1) or two (2) logical drives (LD0 and LD1).
4. Map all the LD to CH0, and CH1.
5. Connect the server1 to CH0/CH1 connector.
6. Connect the server2 to connector.
7. Power on the servers.