Filter
Top Products
Page 44 P/N: F01U035325-01 Copyright © 2007 Bosch Security Systems, Inc. DS7400Xi (4+) Reference Guide
10.11 Keypad Assignment Programming: Program Addresses (3131-3138)
Keypad Assignment Programming is where you assign the keypad type and the partition to which it belongs.
See Glossary (section 6.6) for further details.
Each keypad must have its own Bus address. This must also be selected on the keypad via its address pins. See DS7445/
DS7447 Installation Guide (P/N: 22235). One keypad must be selected as keypad 1.
Defaults: The default, if using only one keypad, is an Alpha keypad belonging to partition one.
* = When in Commercial Fire Mode, certain keypads must have specific assignments (see section
6.11).
** = Keypads 11-15 are connected to the Option Bus. If the DS7412 is connected to the Option Bus (at
keypad address 13 or 14), keypad 13 or 14 is unavailable. Similarly, if the DS7420i is connected to the
Option Bus at keypad address 15, keypad 15 is unavailable; and if the DS7488 is connected to the
Option Bus at keypad address 11-15, the corresponding keypad(s) is (are) unavailable.
*** = If only using one partition, do not program keypads as Master Keypads.
Only program for a Master Keypad if you need to view multiple partitions from a
single keypad.
10.12 Keypad Partition Assignment: Program Addresses (3139-3146)
Data Digit 1 Data Digit 2
K
eypad 1*
default = 1
Program Address 3131
Data Digit 1 Data Digit 2
Program Address 3132
Data Digit 1 Data Digit 2
Program Address 3135
Data Digit 1 Data Digit 2
Program Address 3136
Data Digit 1 Data Digit 2
Program Address 3133
Data Digit 1 Data Digit 2
Program Address 3134
Data Digit 1 Data Digit 2
Program Address 3137
Data Digit 1 Data Digit 2
Program Address 3138
Keypad 2
default = 0
Keypad 3
default = 0
Keypad 4
default = 0
Keypad 5
default = 0
Keypad 6
default = 0
Keypad 7
default = 0
Keypad 8
default = 0
Keypad 10
default = 0
Keypad 9
default = 0
Keypad 11**
default = 0
Keypad 12**
default = 0
Keypad 15**
default = 0
Keypad 14**
default = 0
Keypad 13**
default = 0
** ** *
LCD Backlight Off Until Keypress
Select Options
LCD Backlight Always On
0 1
Alpha (LCD) Keypad
LED Keypad
Select Options
0 1 2 3
Disabled
Master Keypad
***
Data Digit
12
Backlight selection affects all LCD keypads