Filter
Top Products
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)
58 Bosch Security Systems | 9/04 | 50410D
D9412/D7412:
D9112/D7212:
Press the
<No
soft key to reject the name and
return to Step 1.
Add/Change Card
1. Pressing the
Card>
soft key will allow you to
add/change a user’s access card or credential.
2. The display changes to either one of the following
depending on if an access card exists for the user:
User 123 Add Access Card for this user?
- if no
access card exists for that user.
Pressing the
Yes>
soft key will jump to Step 3.
Pressing the
No>
soft key will jump to
Add/Change Level.
User 123 Change this user’s Access Card?
-if an
access card already exists for this user and you
wish to change it. (In both cases, 123 is used as an
example)
Pressing the
Yes>
soft key will jump to Step 3.
Pressing the
No>
soft key will jump to
Add/Change Level.
3. If a card reader is connected to your system, the
display changes to
Present card to card reader
now.
Pressing the
<Exit
soft key exits out of this
function and returns the display to idle text.
If the display changes to
D9210 not ready,
contact your security company.
Pressing the
<Exit
soft key exits out of this
function and returns the display to idle text.
4. If the card you are trying to add to the system
already exists, an error tone sounds and the display
changes to
Card already exists. Please try again.
Pressing the
<Exit
soft key exits out of this
function and returns the display to idle text.
Then the display returns to
Present card to card
reader now.
Pressing the
<Exit
soft key exits out of this
function and returns the display to idle text.