Bosch Appliances D1260B Home Security System User Manual


 
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)
Bosch Security Systems | 9/04 | 50410D 57
Press the
<Exit
soft key to exit out of this menu
and return to the
Level changed.
display.
6. Repeat Step 5 for each area through Area 8.
7. Once the user’s authority level has been verified
for Area 8, the display changes to
Level changed.
If the
Next>
soft key is pressed, the display
changes to Add/Change Sub-User ID (for
D9412/D7412 panels) or Add/Change Passcode
(for D9112/D7212 panels).
If the
<Exit
soft key is pressed, the display
changes to
Add / Change User Enter User #:
Adding/Changing a User’s Name
1. Pressing the Name> soft key will change the
display to
<? JANE DOE
(JANE DOE is used as an example.)
2. To change the name use the following soft keys:
Pressing this soft key will display a series of help
screens where the keypad can be used to enter
specific letters.
Pressing either of these soft keys will cause the
currently underlined character to change the
previous or next character in the list. The available
characters are A-Z, 0-9, @, #, $, &, *, /, -, _, ?, and
+.
Pressing either of these soft keys will cause the
cursor of the currently underlined character to
move left to the previous position in the name or
right to the next position in the name.
Another option is to use the numeric keys to add
characters to the text. For the keys with letters,
pressing the digit will allow you to cycle through
the letters on the key. For instance, pressing '2'
will display an A. Pressing it again will display a
B, and pressing it a third time will display a C.
The '0' (zero) key will display a 0. The '1' key
functions like a space bar - it puts a space in the
current position, and advances to the next position.
3. Once the name appears as desired, press the
Continue>
soft key.
4. The display will change to
New user name is
JANE DOE Is this correct?
At this point you can accept or reject the changes.
Press the
Yes>
soft key to accept the name and
return to the main
Add/Change Menu
(depending on panel model).