Filter
Top Products
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
EN | 120
Operation Bosch Security Systems | 2006-07 | V1.5
Establishing the connection
To use the unit in your network, you must assign it an IP address that is valid in
your network.
The following default address is preset at the factory: 192.168.0.1
– Start the Web browser.
– Enter the unit's IP address as the URL. The connection is established and
after a short time you will see the LIVEPAGE with the video image.
Note
The screen display can differ from that shown above, depending on the
unit variants that you use.