Filter
Top Products
GAS DETECTION
CALL FAX CALL US TODAY
800.833.0247 800.282.4365 www.safetyfire.com
281.479.9700 281.479.6321 –375–
BW TECHNOLOGIES AUTOMATIC TEST STATIONS
Automatic Full-Function Test
Stations
For Zero-maintenance and single gas detectors
Safe and Automatic
Test Stations are engineered for ease-of-use—
simply insert the detector into the test well and
press the red button. The station first verifies
that the detector is installed, then tests the
sensor response time, speed of response,
alarm activation. Watch the color coded
PASS/FAIL advice LED’s as the test quickly
progresses. If all tests are successful, the green
PASS light activates to confirm the detector is
ready for use.
Convenient and Economical
When a test is initiated, the solenoid automati-
cally releases test gas to the detector. The flow
of gas shuts off automatically when the test is
complete, preventing any waste of test gas and
protecting personnel form exposure to the gas.
The AC adapter allows an unlimited number of
units to be tested without the need for battery
replacement.
Test Stations can be conveniently hung on a
wall to be conspicuous reminder for individuals
to test their detectors before entering a poten-
tially hazardous area.
Ordering Information:
Part No. Description
GA-TS04 GasAlert 100 test station (for H2S, CO)
GA-TS02 GasAlertClip test station (for H2S, CO, O2)
GA-TS03 GasAlert & GasAlert LEL test station (for single gas detectors)
Accessories:
Test-Gas Cylinders - Order Gas Separately
G0042-H25 25 ppm H2S, balance nitrogen (58L)
G0041-M100 100 ppm CO, balance nitrogen (130L)
G0043-N2 100% nitrogen for oxygen units (103L)
Simple and Easy
Simply insert the detector into the test-well and press the
red button. Quality test-gases are available of all BW
Technologies gas detection instruments.
Automatic full-function Test Stations are an economical
solution for companies that use large number of gas
detectors. Designed specifically for testing numerous units,
Test Stations eliminate the risk of exposing personnel to
toxic test-gas by providing a fast, safe and easy method of
testing a detector’s response to gas.
• Detector fully tested in 10-30 seconds
• Easy and fully automatic
• PASS/FAIL advice on each test
• Test Stations verify all functions:
Sensor response to gas
Speed of response
Visual LED alarm activation
Audible alarm activation
• Economical use of test-gas
• Test Stations come complete with regulator, reinforced
Teflon test-hose, AC wall-mount adapter and 9-volt
battery
• Over 350 units tested on one 9-volt battery