Filter
Top Products
www.bissell.com 800.237.7691www.bissell.com 800.237.7691
12
Clearing a clog
Low suction or poor pickup may be
due to a clog in the vacuum cleaner.
If you notice a change in the sound
of the motor or a reduction in the
spinning action, check for clogs.
1. Unplug cleaner from electrical outlet.
2. Empty dirt container.
3. Check upper tank for build up or clogs.
4. Check the suction inlet for a clog.
5. Grasp the quick reach handle and lift
hose wand to separate from the suc-
tion opening. Check for a clog in the
base, the wand or the hose.
6. Remove the screw attaching the hose
wand base to the vacuum. Straighten the
hose wand base and unclog with long,
narrow object such as a broom stick.
7. If the clog persists, follow the instruc-
tions for Checking the rotating floor
brush on page 10 and inspect the air
passageway for obstructions.
3.
4.
5
Maintenance and care