Operations
Hard floor cleaning
Your ProHeat 2X model may have come with a
hard floor attachment and Hard Floor Solutions
Formula. If not, these products are available for
purchase by contacting the BISSELL Consumer
Services department by phone or at the website.
The hard floor tool provides effective cleaning for
linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
1. Vacuum or sweep thoroughly to pick up any
loose debris and pet hair.
2. Move any furniture, if needed.
3. Empty any carpet cleaning formula back into
the BISSELL bottle if stored in the formula
tank. Fill formula tank with BISSELL 2X Hard
Floor Solutions, available at many retailers,
or contact BISSELL Consumer Services.
4. Fill the 2-in-1 water tank with hot tap water
and set aside.
5. Attach the hard floor tool onto the bottom of
the machine by hooking it into the nozzle and
swinging it down until it clicks into place.
6. Check ReadyTools dial. It should be set on
floor cleaning.
7. Set the Custom Clean dial to normal clean.
8. Plug into an outlet and turn the power
switch and heater ON ( I ).
9. Slowly move the machine forward and back
over hard floor surface one time while depress-
ing trigger. Caution: Do not overwet.
10. Repeat the motion without pressing the trig-
ger using the hard floor tool to squeegee and
suction up the dirty water.
11. Allow adequate time for floors to dry.
12. Remove hard floor tool, rinse and dry before
storing.
13. If any formula remains in the formula tank,
pour it back into the Hard Floor Solutions
bottle for use the next time.
14
. Rinse out the formula tank.
15
w ww.b is se ll .c om 8 00 .2 37 .7 69 1
WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.
5.
WARNING:
To reduce the risk of fire and
electric shock- when cleaning a
hard floor, the BISSELL hard floor
tool 203-5642 must be used
and it must only be used with
BISSELL Hard Floor Solutions or
BISSELL 2X Hard Floor Solutions
cleaning fluid intended for use
with this appliance.