Filter
Top Products
9
www.bissell.com
ReadyTools™ (continued)
2. Check for colorfastness in an inconspicuous
place.
3. If possible, check upholstery stuffing.
Colored stuffing may bleed through fabric
when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose debris and
pet hair. Use a vacuum with a brush attachment
and a crevice tool to clean in fabric folds and tufts.
6. To start cleaning with attachments, follow
the instructions on page 7, beginning with
"Fill the clean water/formula tank".
7. Set the ReadyTools dial to the TOOLS setting.
This will allow for suction from the hose.
8. Attach the desired cleaning tool to the end of
the hose.
9. Clean by pressing the spray trigger to spray
cleaning solution onto the area to be
cleaned. Slowly move the tool back and forth
over the soiled surface. Release the spray
trigger to suction dirty water. Continue to
clean in the area, working in small sections,
until dirt is removed.
Caution: Do Not Overwet.
10. When finished cleaning, remove and rinse
the tool(s) in clean, running water.
11. It is recommended that you suction clean
water from the tap to rinse out the hose.
12. Before wrapping hose onto tool rack, lift end
of hose and stretch out to ensure all water is
cleared from hose.
13. Wrap hose around tool rack.
14. Empty dirty water tank and rinse out,
following instructions on page 8.
15. If the ReadyTools dial becomes difficult to
turn, the diverter assembly that holds the dial
may need to be cleaned. To clean, flush hot
water through the nozzle. Make sure the dial
is set to FLOOR CLEANING.
Operation