Filter
Top Products
5
www.bissell.com
This user’s guide has been designed to help
you get the maximum satisfaction from your
ReadyDry carpet washer. You’ll find assembly
and operating instructions, safety precautions,
as well as maintenance and troubleshooting
instructions. Please read this user’s guide
thoroughly before assembling your carpet
washer.
Your carpet washer comes in three easy to
assemble components:
• Handleassembly
• Upperhosewrap
• Lowerbodyassembly
Four Phillips head screws are included and can
be found taped to the handle assembly.
The only tool you will need to assemble your
ReadyDry is a Phillips head screwdriver.
1. Slide upper handle into lower body assembly
and secure with 2 screws.
2. Attach upper hose wrap using 2 screws.
3. Wrap hose clockwise around the upper and
lower hose wraps as shown on page 4. Be
sure to properly secure grip into the notched
holder.
4. Keep hose locked in place with the
secure latch.
5. Wrap the power cord as shown on page 4.
6. Place Oxy Gen2 PowerTool in the center tool
caddy and the tough stain tool on the hose
wand.
How to use this guide
Assembly
WARNING:
Do not plug in your carpet
washer until you have
completely assembled it
per the following instructions
and are familiar with all
instructions and operating
procedures.
1.
2a.
2b.
Tip: Regular carpet cleaning
can reduce dust and allergens in
your home.
Upper Hose
Wrap Screws
Upper Handle
Screws