Filter
Top Products
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Maintenance and care
12
The post-motor HEPA media
filter assists in the filtration
process to return clean air to
the room.
1. Unplug the vacuum from electrical
outlet.
2. Remove the filter door (located on
the rear of the vacuum) by pulling
up on the filter door latch.
3. Remove the post-motor HEPA media
filter by grasping the lip of the filter
frame and pulling up.
4. Replace the post-motor HEPA
media filter with a new filter.
NOTE: The post-motor filter is
a white, pleated HEPA media
filter. This filter is NOT wash-
able and must be replaced
when it becomes dirty.
NOTE: The HEPA media filter
should not be touched, when
handling be sure to only touch
the frame.
5. Replace the filter door by inserting
the two tabs at the top of the filter
door and pushing down on the
bottom of the filter door.
Replacing the post-motor HEPA media filter
Post-Motor
HEPA Media
Filter
2.
3.