Filter
Top Products
Your BISSELL PowerForce Turbo Bagless is not
only a powerful carpet and rug vacuum cleaner,
it’s also a versatile above floor vacuum cleaner
when you select one of the special tools.
Raise Handle to Upright Position.
Grasp the Quick Reach Handle and lift Hose Wand to
separate from suction intake opening.
Attach tools by firmly pushing onto Vacuum Hose or
Extension Wand.
Combination Dusting Brush/Upholstery Tool:
Two types of cleaning tools are included in one attachment:
rotate for desired tool.
■ Use Brush side to dust furniture, blinds, books,
lamps, shelves, and baseboards.
■ Use Upholstery side for curtains,
draperies, cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a
longer reach.
TurboBrush: Use rotating brush action
for small areas such as stairs and upholstery.
Note: Press gently when using the
TurboBrush to gain maximum
cleaning. Too much pressure will
cause the brush to stop rotating.
When you are done using your vacuum,
return it to the Upright position and store
the Power Cord.
Turn vacuum cleaner off.
Unplug Power Cord by grasping the polarized
plug (NOT the cord) and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of
vacuum cleaner.
Clip molded plug to Power Cord to secure.
Special On-Board Tools
7
1.
2.
3.
NOTICE:
The Floor Brush will continue to rotate
while you use your vacuum for above
floor cleaning. To prevent carpet
damage, do not lean on the vacuum
or let the Powerfoot tilt forward.
Tip:
Hair, string and small
objects can block
the Vacuum Hose
or Tools. Check
them occasionally for
obstructions.
CAUTION:
The Rotating Floor Brush continues to
rotate while tools are in use. To reduce the
risk of injury from moving parts, always
move the cleaner with the Carrying Handle
at the back of the cleaner. Always place
vacuum cleaner on floor with Handle in
Upright position when using tools. Never
place your fingers under the cleaner when
it is running. Never place Powerfoot on
furniture or uneven surfaces. Do not place
vacuum cleaner close enough to objects to
pull them into rotating brush.
Power Cord Storage
1.
2.
3.
4.
NOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges.
The discharges are entirely
harmless and are not associated
in any way with the main
power supply.
ug203-2829_6596_1105.indd 7ug203-2829_6596_1105.indd 7 1/11/06 4:03:37 PM1/11/06 4:03:37 PM