Filter
Top Products
Fingertip brush switch
The rotating brush is turned on or off using the
switch at the side of the top of the handle. The
brush will start rotating when the unit is reclined.
The brush should be on for most carpeted floors.
You may want to turn the brush off for bare floor
cleaning or other delicate surfaces.
To turn the brush ON, press button once.
To turn the brush OFF, press button again.
Brush auto shut-off feature
When your cleaner is in the upright position, the
brush will not rotate. The brush will rotate only
when the cleaner is in the reclined position and
the brush switch is on.
Using the tools
1. Make sure the cleaner is in the upright position.
2. Remove the hose wand from the wand base.
This automatically diverts the suction to the
hose. Unwind the hose from the cleaner.
Note: To help prevent the machine from
tipping, the hose should remain in the
bottom hose clip.
3 . Use the hose and wand alone or attach any
of the tools to the end of the hose wand.
Operation
7
www.bissell.com
ATTENTION:
Always place the vacuum
cleaner on the floor in its fully
upright position when using
tools. Placing the vacuum in
this position automatically
stops the rotating brush.
2