Filter
Top Products
Troubleshooting
17
www.bissell.com
Vacuum cleaner is difficult to push
Possible causes Remedies
1. Incorrect height setting 1. Turn dial to higher setting
Visible dust escaping from cleaner
Possible causes Remedies
1. Filter tray missing or not installed properly 1. Check filter tray to make sure it is
fully inserted
2. Foam filter missing or not installed properly 2. Check for foam filter and correct installation
3. HEPA filter cartridge missing or not installed properly 3. Check for HEPA filter cartridge and
correct installation
4. Dirt container not installed properly 4. Make sure dirt container is correctly
positioned and snapped into place
5. Dirt container not assembled properly 5. Check screen, upper and lower portions of
the dirt container for proper assembly
6. Hose not installed properly 6. Make sure hose wand is fully seated in
base, make sure foot hose is properly
attached to diverter area
7. Hole or crack in hose 7. Check hose for holes or cracks and replace
if needed
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.