Filter
Top Products
Height adjustment
There are seven height settings available for
various floor surfaces. Turn the dial on the foot of
the cleaner to the desired setting.
Lowest setting – For bare floors.
Medium settings – For short and medium pile
carpets.
High setting – For plush carpet.
Note: For optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
If the dial is difficult to turn, tilt the cleaner
back slightly to take the weight off the foot while
turning.
Fingertip brush switch
The rotating brush is turned on or off using the
switch at the side of the top of the handle. The
brush will start rotating when the unit is reclined.
The brush should be on for most carpeted floors.
You may want to turn the brush off for bare floor
cleaning or other delicate surfaces.
To turn the brush ON, press button once.
To turn the brush OFF, press button again.
Brush auto shut-off feature
When your cleaner is in the upright position, the
brush will not rotate. The brush will rotate only
when the cleaner is in the reclined position and
the brush switch is on.
Operation
7
www.bissell.com 800.237.7691
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area may aggravate this
condition. Consider setting your
cleaner on a higher than normal
setting for this type of carpet.