Filter
Top Products
Replacing the HEPA media filter cartridge
The HEPA media filter cartridge should be
replaced every six months or if suction
is declining. More or less frequent
replacing may be required based on
individual vacuuming habits and types of
debris picked up.
1. To remove the HEPA media filter
cartridge, push down on the filter door
latch and pull door away from the
cleaner.
2. Lift the tab at the top of the HEPA media
filter cartridge and pull cartridge away
from the cleaner.
3. Replace the used HEPA media filter
cartridge with a new one.
Note: To avoid damaging the HEPA
media filter cartridge and reducing
its filtration capabilities, be careful
not to touch the filter material. The
HEPA media filter cartridge is not
washable.
4. To ensure a tight seal, the filter cartridge
must latch fully in place. To install, push
firmly near the top with the palm of your
hand while holding the vacuum with
your other hand.
11
www.bissell.com 800.237.7691
Maintenance and care
1
2
4