Bissell 50C9 Vacuum Cleaner User Manual


 
15
www.bissell.com 800.237.7691
Changing the light bulb
1. Unplug cleaner from electrical outlet.
2. Recline handle for easier access to light bulb
and remove screw to lift off lens.
3. Remove the bulb by grasping bulb and pull-
ing straight out of the socket. Install the new
bulb by pushing gently into the socket until
the bulb snaps into place.
TurboBrush maintenance
The TurboBrush should be checked regularly for
clogs or debris wrapping around the brush.
1. Remove tool from hose or front of vacuum.
2. Twist collar so opening is at the top and lift
top cover to remove.
3. Remove the brush from the belt and clean
debris.
4. Replace the brush inside the belt and place
ends into slots on sides as shown.
5. Reposition top cover making sure to line up
inside tab at the front with the opening on
the cover. Twist collar until opening is at the
bottom to lock into place.
Maintenance and care
2
4
3
5
2