Filter
Top Products
www.bissell.com 800.237.7691
Maintenance and care
10
To maximize performance and extend
life of your vacuum it is very important
to perform the following maintenance
steps:
Empty Dirt Container
Empty when dirt reaches the "Full" line
on the container.
1. Turn power OFF. Unplug vacuum cord
from electrical outlet.
2. Slide the Lock ‘n Seal lever to the
"Unlock" position.
3. Grasp dirt cup handle and pull straight
out to remove from vacuum and empty.
4. Place dirt container back in the vacuum
and slide the lever to the "Lock" position.
Note: The dirt container may be
washed in warm water with a
mild detergent. Make sure it is
completely dry before replacing.
WARNING:
To reduce the risk of
electric shock, turn power
switch OFF and disconnect
polarized plug from electri-
cal outlet before performing
maintenance or
troubleshooting checks.
Tip:
For maximum cleaning performance,
check and clean or replace all filters
as suggested.
Full Line
Lock
Position
Unlock
Position
2.
3.