Filter
Top Products
5
Flip open the Tool Door on the side of the Powerfoot. Insert
end of Vacuum Hose into Hose Port fitting tabs into notches,
turn clockwise to lock. Hose should be left in place at all times
for maximum cleaning performance.
Press Hose into outer Hose Clip. Route Hose over top of
cleaner pressing into both sides of Tool Rack. Place end of
Wand into the round cup and snap hose into clip with wand
ring sliding under clip.
Attach Tools to Tool Rack as shown. Slide Dusting Brush onto
Upholstery Tool for storage. Place Extension Wand into clips
at side between Hose and Bag Assembly.
1.
2.
3.
Attach Tools to Vacuum
Unzip Cloth Bag.
Fold down top of new Dust Bag.
Grasp Bag Collar and push Collar firmly over raised rib on
Connector Tube. Pushing too hard on the Collar may rip
the Dust Bag.
Tuck remainder of Dust Bag completely
into vacuum cleaner. Lay it flat, top to
bottom, without bunching.
Zip Cloth Bag closed.
1.
2.
3.
Install Dust Bag
4.
5.
1
2
3
3
4