Filter
Top Products
11
Replace Lightbulb
Unplug unit from electrical outlet.
Remove Cleaning Selector and Floor Surface Selector Knobs by
grasping knobs firmly and pulling straight up. Remove
Vacuum Hose from Hose Port by turning counterclockwise and
lifting up.
Place Handle in Low position and turn vacuum cleaner face
down on floor.
Insert a blade type screwdriver into four slots on Powerfoot and
pry outward on sides of Top Cover to unsnap internal latches.
Turn vacuum cleaner face up on floor and lift Top Cover
from Powerfoot.
Grasp bulb with fingers and gently work from side to side while
pulling up. Do not squeeze bulb too firmly or it may break and
injure you.
Insert new bulb, pushing gently until is firmly seated in socket.
Realign Top Cover to Powerfoot and press downward until you
hear all four internal latches snap into place. Test Top Cover for
tightness by pulling up on it.
Press Selector Knobs onto prongs on Powerfoot.
1.
2.
Replacement Bulb
Use only BISSELL
®
Replacement Bulb (#5559069) in your
Upright Vacuum Cleaner.
3.
4.
5.
6.
7.
8.
9.
3
4
5-7
8