Bissell 3512 Vacuum Cleaner User Manual


 
9
WARNING: To
reduce the risk of injury
from moving parts, turn
off vacuum cleaner and
disconnect Power Plug
from electrical outlet.
Lock Tabs
Unplug unit from electrical outlet.
Place Handle in Low Cleaning position and turn vacuum
cleaner face down on floor.
Locate two Lock Tabs adjacent to forward wheels on removable
Brush Cover. Using your fingers, press outward on each Lock
Tab separately to remove Brush Cover.
1.
2.
You should check your vacuum cleaner’s Drive Belt and
Rotating Floor Brush regularly for wear or damage. You should
also clean the brush and brush ends of string, hair, and carpet
fibers. These can wrap around the brush and hamper its ability
to effectively clean your carpet.
3.
Check Rotating Brush and Drive Belt
Unplug cleaner from electrical outlet
Unzip Cloth Bag.
Grasp paper Dust Bag and Bag Collar, pull used Dust Bag from
Connector Tube, and dispose of Dust Bag.
Fold down top of new Dust Bag.
Grasp Bag Collar and push Collar firmly over raised rib on
Connector Tube. Pushing too hard on the Collar may rip the
Dust Bag.
Tuck remainder of Dust Bag completely into vacuum
cleaner. Lay it flat, top to bottom, without bunching.
Zip Cloth Bag closed.
1.
2.
3.
Replace Dust Bag
Use only BISSELL
®
Style 2 Dust Bags in your Upright Vacuum
Cleaner. To maintain peak vacuum efficiency, you should check
the Dust Bag weekly, and replace it when it is no more than
half full.
Never reuse a paper Dust Bag.
4.
5.
6.
7.
5
6
3