Filter
Top Products
8
The key to maximum performance is emptying the Dirt Cup
frequently and cleaning the Filter. Emptying the Dirt Cup after each
use, and cleaning the Filter periodically, will help your CatchAll
operate at peak efficiency.
Use only BISSELL Replacement Filters (203-2518) in your
BISSELL CatchAll.
With the Rotating Brush facing away from you, push
forward on the Dirt Cup Release. Then grasp the Dirt
Cup and pull toward you and out.
Remove the Filter from the Dirt Cup and empty debris into
a garbage container. Shake the Filter to remove any debris.
Replace the Filter in the Dirt Cup and place the Dirt Cup
back in position in the cleaner.
Lock the Dirt Cup into place by pulling the Dirt Cup
Release toward the Dirt Cup.
After heavy usage, you may clean the Filter by washing it
gently by hand in warm water and mild detergent. Rinse
thoroughly and make certain it is completely dry before
replacing it. If Filter is torn, replace it with a new Filter.
1.
Emptying The Dirt Cup & Cleaning The Filter
4.
5.
3.
Maintenance
2.
WARNING:
Never operate the CatchAll
without the filter in place.
Doing so may damage the
motor and void the warranty.