Filter
Top Products
7
If the Battery Pack is not already in your CatchAll,
remove it from the Charging Base and press firmly into
place aligning the metal contacts on the bottom.
Tip the Handle back into typical use position. Turn the
cleaner on by pressing the On/Off Button on the top of
the vacuum.
Clean large areas by pushing forward with the Rotating
Brush in front. This will allow the vacuum to get the dirt
and debris while the cloth dusts your floor.
To clean in corners and low-clearance areas, turn
the cleaner in the opposite direction to lead with the
electrostatic cloth. Any loose dirt or debris can be
pushed out and then vacuumed up.
Note: You may also use your CatchAll without the
cloth for quick vacuuming pickups. Or you can use
the cloth without the vacuum turned on to quickly
dust your floors.
When you’re done, turn the cleaner off by pressing the
On/Off button again. The Battery Pack may be left in the
cleaner or returned to the Charging Base for recharging.
5.
Cleaning Your Bare Floors
2.
3.
1.
4.
WARNING:
Use only DRY electrostatic cloths
with your BISSELL CatchAll. Use
of wet or pre-moistened cloths
may damage your cleaner and
void the warranty.