Filter
Top Products
This User’s Guide has been designed to help you get the most
satisfaction from your CatchAll Bare Floor Cleaner. Enclosed you’ll
find assembly instructions, tips for all cleaning tasks, safety
precautions, plus maintenance and troubleshooting instructions.
Please read this Guide thoroughly before using your CatchAll
Bare Floor Cleaner. Pay particular attention to the parts diagram,
assembly instructions and part names. Following the Guide will
greatly enhance your ability to get the most performance from
your CatchAll for many years.
The CatchAll requires very little assembly. Remove it from the
box and check against the illustration to familiarize yourself with
the parts. This illustration with part names will also be helpful if
you should need to order a part at a later time.
Assemble the Handle by screwing together the 4 metal
sections, placing the Handle Grip at the top.
Screw the Handle Assembly into the Swivel Handle at
the top of the cleaner.
The Battery Pack is not fully charged when packed in
the carton. It should be charged at least 8 hours before
using it for the first time. Thereafter, a 6-8 hour charge
will renew the Battery Pack.
To charge the unit, remove the Battery Pack by gripping
it firmly on both sides and lifting up and out. Place the
Battery Pack in the Charging Base aligning the metal
contacts on the bottom. Plug the DC Adapter of the
Charging Base into a standard electrical outlet (120V-
60hz). The Indicator Light will glow red, showing the
battery is charging.
When completely charged, the CatchAll provides over
15 minutes of full cleaning power. An additional Battery
Pack may be purchased to extend run time.
5
WARNING:
Electric/electronic appliances
should not be subjected to extreme
temperatures or high humidity. Do
not store the CatchAll in bathing
areas or close to stoves, furnaces
or radiators.
Tip:
Fully charge battery
before using.
Charging The Battery
How To Use This Guide
How To Put It Together
1.
2.
1.
2.
3.