Filter
Top Products
Power cord storage
When you are finished using your vacuum, return it
to the Upright position and store the power cord.
1. Turn vacuum cleaner off by pushing the
power switch.
2. Unplug power cord by grasping the polarized
plug (NOT the cord) and disconnect from outlet.
3. Loop power cord around cord wraps on back
of handle.
4. Clip molded plug to power cord to secure.
Transporting cleaner
1. To move your vacuum cleaner from room to room,
put the Handle in the Upright Position, tilt the
cleaner back on its rear wheels and push forward.
2. The cleaner can also be moved by using
the carrying handle on the dirt container.
To maintain maximum cleaning performance, the
following maintenance steps must be performed:
1. Unplug cleaner from electrical outlet.
2. Empty the dirt container when the dirt
reaches the “Full” line on the back.
3. Check the pre-motor filter at least once a
month and clean and replace as needed.
4. Check and replace the HEPA media
post-motor filter as needed.
NOTE: More frequent filter cleaning may be
necessary if you are vacuuming new carpet,
fine dust, or have allergy concerns.
Follow the instructions on the following pages
to perform these simple maintenance steps.
8
w ww.b is se ll .c om 8 00 .2 37 .7 69 1
Operation
NOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges.
The discharges are entirely
harmless and are not associated
in any way with the main power
supply.
Maintenance and care
Tip:
For maximum cleaning
performance, check and
clean or replace all filters
as suggested.
WARNING:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect polarized plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
Full Line
2.
Carrying Handle
1.