Filter
Top Products
This User’s Guide has been designed
to help you get the utmost satisfaction from
your BISSELL Little Green Portable Deep Cleaner.
You’ll find assembly and operating instructions,
safety precautions, as well as maintenance and
troubleshooting instructions. Please read this
Guide thoroughly before assembling your cleaner.
Pay particular attention to the product
diagram, assembly instructions, and part names.
Locate and organize all parts before assembly.
Familiarize yourself with the parts and where they
go. Following this User’s Guide will greatly
enhance your ability to get the most performance
from your BISSELL Little Green for many years.
Refer to Assembly Diagram on page 4
Solution Tank
The Solution Tank is the translucent tank at your
right as you face the Little Green. Remove the
Tank by grasping the indented handle and pulling
it toward you, then tilting out.
To Fill the Solution Tank
Open the Solution Tank by pulling up on the round
cap. Add BISSELL Little Green Formula to the
FORMULA fill line (8-oz.) on Solution Tank.
NOTE: Your Little Green is shipped with an 8
oz. starter bottle of formula.
Fill the Solution Tank with hot (NOT boiling) tap
water to the WATER fill line.
Replace the cap before placing the Solution Tank
back into the unit.
Replace the Solution Tank by pacing it bottom first
into the cavity, then tilting it, pressing gently at top
until it snaps closed.
Collection Tank
The Collection Tank is the translucent tank at your
left as you face the Little Green. It is removed
and replaced on the unit just like the Solution
Tank. Empty the Collection Tank after each use,
when dirty water reaches the indicated maximum
fill line, or as instructed in this User’s Guide.
5
Product Features
How to use this guide
Water
Fill
Line
Formula Fill Line
WARNING:
Do Not plug in your deep
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.